Fascia board is the structural material that is fitted along the rafter ends at the eaves to close the gap between each rafter, commonly referred to as roofline. It is mounted on the exposed ends of rafters or the top of exterior walls to create a layer between the edge of the roof and the outside.

Traditionally, fascia boards were made of 3/4" or 1" thick timber, but UPVC has become the material of choice because it is maintenance-free and lasts much longer. Our Fascias are the perfect direct replacement board to make an attractive improvement to any home and are especially ideal for new builds. We primarily stock Swish and Freefoam who are leading manufactures in the building trade business, which means we can offer a range of sizes and styles to suit any project. Our range of Fascias offer a variety of choice in colour and woodgrain finishes; all of which are compatible with various types of Soffit. We offer an manufacturer backed extended guarantee when installed by an improved installer.

An Exterior Cladding product range that provides a decorative and protective facing to any new build or renovation project.

Shiplap Cladding

➦ Product Information

Open V Cladding

➦ Product Information

TeeGee Cladding

➦ Product Information

Feather Edge Cladding

➦ Product Information

Our External Cladding is a low-maintenance, attractive and weather-resistant solution for sprucing up your home. Whether it's adding an interesting feature to a house, concealing worn out brickwork or replacing rotten timber cladding then we've got you, and your property covered.

White Cladding

Cellular PVC cladding can significantly improve the thermal properties of a building and provides an excellent low maintenance alternative to timber. The Swish cladding system offers excellent colourfastness and considerable design choice.

Foiled Cladding

Cladding profiles are commonly used on the cheeks and apex of dormer windows, as a long life replacement for softwood claddings and as a ceiling soffit for large open porches. The Foiled range is compatible with many window and conservatory system colours, and features colour matched trims and joints.

Cladding & Soffit & Gutter

Swish White Cladding

Foiled Light Oak Cladding

Withstands high weight & Load

Easy Installation

Low Maintenance

No rotting, splitting or warping

Eco friendly product

Bespoke sizes can be produced

M-Boss Cladding

Swish M-Boss cladding profiles provide a traditional timber appearance with the practical, low maintenance benefits of cellular PVC. The range is complemented by matching M-Boss trims.

Versatile Designs

Cellular PVC cladding can can be fitted in a variety of patterns including horizontal, herring-bone or diagonal. Some profiles can be mounted vertically.

Product Guarantees

All Swish White cellular PVC profiles carry a 20 Year Product Guarantee. All foiled and coloured cellular profiles carry a 10 Year Guarantee.

Swish External Cladding is available in the following colours...

Note: These swatches are not an accurate representation of colour therefore it is recommended that a sample be requested to aid colour matching.

Shiplap Cladding

Robust cellular PVC cladding profiles in traditional styles, with complementary joints, trims and fixings. Cellular PVC cladding is an ideal substitute for timber cladding; it will not discolour, retains its appearance, is virtually maintenance free and is weather resistant.

Cladding Trips

Design Information

White Cladding

Battens: Min. 19 x 38mm. Recommended 25 x 38mm (suits return flange on C027 starter trim and C040 universal channel with batten cover).

Airspace: Minimum 19mm. Recommended 25mm, with ventilation.

Fixing Centres: 600mm max. up to 2 storeys 400mm max. from 2 to 5 storeys.

Coloured & Foiled Cladding

Battens: Min. 50 x 38mm

Airspace: Min. 50mm to the rear of the installation. Continuity of the ventilation path should be achieved by omitting the starter batten and by venting into the eaves or leaving a 10mm air gap between the cladding and soffit. Angle ventilators C061 or C065 can be installed at the base and top of the installation to prevent insect ingress.

Fixing Centres: 400mm max.

General

Fixings: 25mm A4 stainless steel pins (C203) for 19mm battens. 30mm A4 stainless steel pins (C204) for 25mm battens.

Breather membrane: Install over timber frame or in exposed locations.

Insulation incorporated: Counter batten and include breather membrane. 25mm ventilated airspace must be provided for white, coloured and foiled cladding as above. Sealing: Use low modulus silicone (C077).

Swish Rainwater Systems and Drainage Systems are ideal for those who wish to specify quality products that have a reduced carbon footprint.

Swish Rainwater systems are unique in the UK, they contain a high proportion of post consumer recycled PVC.

Approximately, by weight 84% of gutters and pipes are composed of recycled material that is derived from old PVC windows and gutter systems. These have been removed from buildings when being refurbished or demolished, the production of PVC components from recycled material requires a fraction of the energy needed to manufacture virgin PVC. Approximately 70% saving in CO2 output is made during the production of Swish gutter and pipe profiles, compared to production of 100% virgin material.

Swish Rainwater Systems are designed for application in most domestic and light commercial properties throughout the UK. Information to assist the specification of swish gutter systems are available in the ➦ Swish Rainwater Design and Installation Guide.

Reasons to invest in our Guttering & Drainage and Rainwater systems.

High Quality

High-quality rainwater systems ideal for all scale projects.

Innovative Solutions

Prevents rapid heat absorbtion and gutter expansion.

Sustainable

Sustainable c02 footprint production process.

Product Range

Diverse styles and colours for various design themes.

All White Finish

10mm Vented Soffit

Classic White Combination

Soffit & Cladding Combination

Fascia Variations

Ogee White

Accessories

Swish Rainwater System accessories are injection moulded. Components incorporate a simple clip together system for fitting gutter and pipe profiles. Gutter profile fittings include pre-installed seals that are lubricated during manufacture to ease the clipping process.

Gutters and Pipes

Gutters and pipes have a core of recycled material which is grey in colour in order to avoid the unnecessary use of additional colouring agents.

Our Rainwater systems are available in the following colours:

Round Gutter

A standard and economical half round system for use on traditional small to medium sized houses. The gutters are easy to fit with a complete range of colour matched fittings. 

The round gutter systems are produced in high gloss finish in white, black, brown, caramel, grey and anthracite grey. Swish gutter systems carry a 10 Year Guarantee for the black, white, brown, grey and anthracite grey profiles.

All styles and colours of Swish gutters are BS Kitemarked.

Square Gutters

Popular square look gutter with a higher capacity suitable for most domestic dwellings. The gutters are easy to fit with a complete range of colour matched fittings. 

The Square gutter systems are produced in high gloss finish in a choice of 4 colours - white, black, brown and caramel. The Square gutter systems can be installed with Round or Square Downpipe system. Swish gutter systems carry a 10 Year Guarantee for the black, white, greys and brown profiles.

All styles and colours of Swish gutters are BS Kitemarked.

Ogee Gutters

Where capacity and aesthetics are important the Ogee system has it all. Corners and joints are fixed to the fascia for extra security.

The Ogee gutter systems are produced in high gloss finish in a choice of 5 colours - white, black, brown, caramel and anthracite grey. Ogee gutter systems can be installed with Round or Square Downpipe system. Swish gutter systems carry a 10 Year Guarantee for the black, white, brown, grey and anthracite grey profiles.

All Swish guttering systems and colours are Kitemarked.

Deep Flow Gutters

A deep gutter with a higher flow rate for larger buildings and commercial premises.

The Deepflow gutter systems are produced in high gloss finish in a choice of 4 colours - white, black, brown, grey and anthracite grey. Swish gutter systems carry a 10 Year Guarantee for the black, white, greys and brown profiles.

All styles and colours of Swish gutters are BS Kitemarked.

Superdeep170 Gutters

Swish SuperDeep 170 is a super tough, high capacity gutter for use on commercial buildings, hotels, flats and any structure that has a large roof area.

At 170mm from rim to rim SuperDeep 170 has a huge reservoir and is designed to move water rapidly into and down a 100mm or 110mm down pipe. SuperDeep 170 has an independently tested, market leading flow rate of 4.3 litres per second when set level, and 10.5 litres per second when set at 1:350.

All styles and colours of Swish gutters are BS Kitemarked.

Cast Iron Gutters

This cast iron effect gutter provides a traditional appearance with all the benefits of a modern UPVC rainwater system.

Cast iron finish offers a rustic effect that is in keeping with vintage style period properties. All styles and colours of Swish gutters are BS Kitemarked.

Undeground Drainage

Although soffits are not a standout feature on your house they do play a crucial role in securing your home.

Soffit boards fit between the fascia and wall of your house, they're less exposed to the weather but we have taken every precaution to ensure our soffits are weather proof, long lasting and put a finishing seal between your walls and roofline. Sizes range from 605mm to 100mm in both white and different coloured options. ➦ Click for details.

All White Finish

10mm Vented Soffit

Classic White Combination

Soffit & Cladding Combination

Fascia Variations

Black Soffit Combination

Over Fascia Ventilation

Where a ‘clean’ soffit is required use an Over Fascia Ventilator or a Vented Eaves Protector, fixed securely to the top of the fascia board.

The Vented Eaves Protector eradicates ‘ponding’ which may occur behind the fascia board where the sarking felt can sag. This provides a continuous 10mm air path.

Through Fascia Ventilation

Polo™ ventilated soffit boards provide the equivalent of a continuous 10mm or 25mm air path as required.

Strip ventilators allow additional or alternative means of ventilation to the roof void. These are designed to fit Swish 9mm GeePee™ soffits and are available in both 10mm and 25mm configurations.

Swish colour chart swatches...

When browsing the product tables below you can reference the product codes with the images above.

9mm Soffit Boards

A range of plain and vented soffits available in white and colours. Vented soffits are available as either 10mm or 25mm continuous air gap equivalents.

Cladding Used as Soffit

Open V and Tee Gee cladding profiles used as soffit boards where enhanced detailing is required across a large area e.g. a porch ceiling or overhang.

Fascia plates play a small but vital role in your home, which is why we ensure top performance and quality.

We manufacture our own Composite Doors with signature standards based on your design choices!

TruSeal Plastics offers three distinct styles of GRP composite doors to suit various home designs: Traditional, Designer, and Contemporary. Each type can be customized with different Door finishes, Door Styles, Glass options and a wide range of colours to create the perfect look for any property.

Some samples of Customized Doors

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Gallery of Happy Customer Homes!

Jazz Glass

Contemporary Slate

Bahia Blue

Traditional Black

Graphito Glass

Agate Grey

Designer Skyline

Cotswold

Tectronic Glass

Side Panels

Thermal Efficiency

Make your House your Home

The front door is one of the defining features of your home and as you can see by these brilliant examples, our custom built doors have helped to inject the personality of the home owner into the design making it a pleasure and personal investment lasting many decades.

DOWNLOAD BROCHURE

Our Superior Standard Components:

Each of our Composite Doors come with standard components that have the TruSeal of approval. Over the years we've come to understand what makes for a reliable door that is secure, looks good and last a very long time, which is exactly what you'll get!

Some key points to note about our GRP Custom Composite Doors:

Custom Made

Our custom made doors are designed by you, for you and your home. There's a large range of variety with choices starting with the type of Frame, Shape of Frame, Style of Door, Colour, type of Glass, Glazing and additional finishing touches such as door handle position and letterboxes.

Secured by Design Lock

Approved to high security British Standard TS007: 2014 and police secure by design. The Replacement Euro cylinder has hardened steel core and multi layered defence solution to prevent forced access from criminal attack. It also has Anti-pick, anti-screw, anti-pull, anti-bump and anti-drill components designed to resist known attack methods on door lock cylinders.

Sound Insulation

Our doors offer a weighted noise reduction of 31 decibels! This means you can be sure your new door will keep outside noise to a minimum, helping to make your home the haven you want it to be.

Thermal Efficiency

When it comes to ever increasing energy bills, you'll no doubt ended up retaining more and spending less. Our GRP Composite Doors are:

• - 19% More thermally efficient than a 48mm solid timber core composite door.
• - 17% More thermally efficient than a 44mm traditional timber panelled door.

Low Maintenance

Our GRP composite doors are designed to be easy to maintain. The triple glazed insulated glass unit encapsulates the delicate decorative glazing between two panes of clear glass, protecting it and making it easy to keep clean.

Stunning Aesthetics

Our woodgrain finish was developed from oak tree grain to create an authentic beautiful appearance. You’ll find the same woodgrain effect and moulding design on the slim glazing cassette too, giving an elegant, seamless finish for impressive kerb appeal.

Call us now on 01623 634 444 for advice on building your Custom Door!

Precision engineering, optimization and modern manufacturing techniques have created a beautifully proportioned, thermally efficient, strong and secure lantern solution for your home.

Our slimline roof lanterns have been successfully developed to blend contemporary, yet classic design with cutting edge engineering concepts to create an astonishingly beautiful roof lantern, strongest and most thermally efficient in its class it is also incredibly quick and simple to install. 

Here's just a few key reasons why you should consider our Roof Lanterns:

Structural Elegance

The slim elegant Korniche design fits perfectly in any home by retaining traditional features in a contemporary setting.

Information

Strong & Secure

Korniche has been optimised to create the strongest and stiffest roof lantern possible with minimal structure to obscure your view.

Information

Thermally Efficient

Guaranteed thermally efficient by the elimination of cold bridging, achieved by isolating external profiles from the internal ones.

Information

Small Kitchen Roof Lantern

Rear Patio Roof Lantern Top View

Close up of Roof Lantern

Under View of Roof Lantern

Larger White Roof Lantern

Long Roof Lantern

Birds-Eye Roof Lantern

Top view of Roof Lantern

Extra Large Sky Lantern

Structural Elegance

Thermally Efficient

With complete roof U values from 1.2w/m2K Korniche provides your home with a room that’s comfortable all year round.

Thermal Eaves Beam

Thermal efficiency starts at the bottom of our roof. Eaves beams are fully thermally broken to create an insulated barrier between the aluminium sections.

Insulating T-bar

Our in-house designed high quality insulating T-bar bridges the gap between the profiles and the aluminium finishing caps to create the largest possible thermal break.

Performance Glazing

Korniche can be supplied with a range of high performance self-cleaning glass options to suit every taste. To complement your new roof you can choose from either blue, aqua, bronze, tinted, neutral or clear and with U Values ranging from 1.0 – 1.2.

Strong & Secure

The Korniche range has been optimized to create the strongest and stiffest roof lantern possible with minimal structure to obscure your view.

Unparalleled in strength, the Korniche can survive whatever nature throws at it. Put into perspective a 6m x 4m Korniche roof can support over 8 tonnes.

More Glass, Less Roof

Design optimisation ensures thatKorniche has the largest glass spans and fewest rafters currently available from any other system on the market.

Highest Quality Weatherproofing

Providing the last word in weatherprotection Korniche uses the best seals and gaskets available throughout, ensuring complete peace of mind in the most extreme conditions.

Security

Our innovative glass lock system and tamper proof fasteners keep everything tightly in place and once finishing capping’s are fitted, there are no visible fasteners anywhere to be seen.

Boston Depot has been supplying the Trade since it was opened in July 2019.

We are located just off John Adams way in the Nelson Way Industrial estate, diagonally opposite Turnbulls Builders Merchant.

➦ CREATE TRADE ACCOUNT

Trade Depot Details

Telephone: 01205 875743	Address Hamilton Way, Nelson Way Industrial Estate, Boston, Lincolnshire, PE21 8TT
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
⦿ View on Google Maps

---

Depot Trade Hours

Monday	7.30am - 4.30pm
Tuesday	7.30am - 4.30pm
Wednesday	7.30am - 4.30pm
Thursday	7.30am - 4.30pm
Friday	7.30am - 4pm
Saturday	8am - 11am

---

Google Depot Reviews

---

Boston Manager: Tony Thayne

I have been with Truseal since the acquisition of the old Trade Windows Factory and Trade Counter in July 2019, where I worked as Manager for 10 years.

Before this I was employed as the Warehouse Manger for Building & Plastic Supplies for 5 years. We inherited quite a substantial Customer Base, which we have continued to serve successfully. I am particularly pleased with the friendly atmosphere and high level of service we provide, which I think has greatly contributed to the increase in sales and has allowed this Customer base to grow.

Phone: 07730008503
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Quisque erat sapien, porttitor vel lacinia id, commodo a eros.

Family values run throughout our workforce..

Over the years we’ve built a solid team and workforce with some staff that have been with us for over 25 years. This is because we offer a work environment that’s friendly, happy and where our employees feel like part of the family.

We invest time and energy into our team by offering onsite training. We employ with career progression in mind and don’t overlook anyone who has the correct work ethic to ensure they’re fulfilled in their day to day work which helps us to maintain a family feel throughout the whole company.

Our family workforce has expanded progressivly over the last 8 years as we now employ over 100 members of staff. We started out with just 4 trade depots back in 1997 and now have 15+ trade counters across the country; Nottinghamshire, Lincolnshire, Leicestershire, Yorkshire, Staffordshire and Greater Manchester, all with a sizable sales team highly qualified at doing what they do.

A company we're proud of

We pride ourselves on happy, hardworking team members, exponential sales experience, a growing marketing team and strong accounts department

We’re proud to say we feel our sales team is the best in the industry; our talent has worked for large national manufacturing companies to smaller independent local building trade businesses. We utilise all of this experience, nurtured talent, work ethic and put it all under one umbrella which forms a great recipe for a thriving family company; TruSeal Plastics Group. Our team members work hard on a daily basis and have contributed to the growth of a building trade company that we’re all very proud of. 

Dedicated workforce

We invest in our team, and they invest in us which is why no one is overlooked or taken for granted. The workforce at TruSeal understand our commitment to client service which is why we always go the extra mile. Before quoting, we like to understand our clients’ needs, rather than issue a quote for 8000 products, we ask for client feedback, to ensure that we’re offering them the best possible products and the best possible prices.

One to one Client Service

All of our depot managers and trade counter staff have vast knowledge of how to install products. So if you’re from the DIY market and wonder how you’re going to fix that cladding, or taking on a home build project then we’re here to offer advice and guidance. You can pick up the phone and call us, or just ask behind the trade counter when you visit, we’ll point you in the right direction and put you on track.

Key members of staff

We invest heavily into our team and they invest in us with their hard work and dedication.

From trade counter operations, branch managers to drivers; we aim to fill all the key roles necessary to operate a branch from our current workforce.
Below are just some of the major players that make TruSeal tick:

Russ Skellett

Founder

Russ founded and built Tru Plastics limited from the ground up. Sadley, Russell passed away in 2022 but his legacy inspires us day by day.

Ken Skellett

Director

Ken and his wife Evelyn are the backbone of the business. Ken fits new branches out personally and enjoys being on the tools delivering materials to clients first thing in the morning.

Evelyn Skellett

Director

Evelyn looks after all aspects of the business - everything but not limited to I.T, Stationary, workware and accounts. Without Ken and Evelyn, the business would not be where it is today.

Yvette Roberts

Director

Yvette runs the financial side of the business making sure the accounts are in order and credit control is on point.

Craig Haslam

Managing Director

Overviews all departments with a special focus on operational aspects throughout the business.

Tim Brooks

Financial Director

Tim manages the financial health and strategy of TruSeal Plastics for long-term growth and development.

Chris Mace

Area manager South

Chris has been a valuable member of TruSeal for many years and overlooks our Trade Depots in the South of England.

Graham Jones

Area Manager North

Graham has been a valuable member of TruSeal for many years and overlooks our Trade Depots in the North of England.

Steve Pritchard

National Sales Manager

Steve is the driving force behind all regional sales supporting all areas and departments within TruSeal. He joined the team in 2019 and has become a invaluable asset to our company.

Michelle Mace

Assistant Procurement Manager

Michelle is part of our Procurement team who are driven in finding the right products at the right price to make us a force within our industry.

 

David Hill

Head of Internal Sales

David joined us in 2019, he is responsible for the internal sales team, David has a wealth of expertise in sales and is enjoying growing positive results heading up his team.

Brett Harland

Area Sales Manager

Brett is down-to-earth and customer-focused. He handles pricing, technical details, product info, and account support within Ilkeston, Langley Mill, and Mansfield.

Tim Jones

Area Sales Manager

Tim is responsible for the external sales out of our Leeds, Donaster, Sheffield and Chesterfield Depots - Tim forms fantastic relationships with his client's whilst offering a unique level of service.

Kieran Atkinson

Area Sales Manager

Kieran joined TruSeal in 2021 and quickly advanced to Depot Manager. He values strong customer relations and consistently enhances branch performance. Kieran now oversees Boston & Lincoln areas.

Ross Pearce

Area Sales Manager

Formerly Depot Manager at Langley Mill and Loughborough, Ross's dedication and expertise earned him a well-deserved promotion to Area Sales Manager for Loughborough, Hinckley & Stafford.

David Maybank

Area Sales Manager

David is a longtime TruSeal team member with extensive industry experience and knowledge. He assists customers within Leeds, Manchester, and Doncaster.

Trade Depot Managers

Jump on board, we’ll look after you.

We consider our suppliers and clients as partners, after all, without them there would be no business.

A sales representative will be personally assigned to you, ready to cover all your trade needs and requirements. They’ll arm you with marketing materials and brochures that will help you pinpoint your house build products. We’ll also support you by delivering onsite or to whichever premises suits you best.

There’s no timescale to wait and see anyone; just drop us a quick phone call and we’ll send out a salesman to you the next working day. Give us a try, you won’t be disappointed!

Typical Working hours: Our working hours are usually 7.30am until 4.30pm, but our sales reps and branch managers often work out of hours to answer calls and emails, we are one of the few companies that can be contacted 365 days a year 24/7.